Threeway Steel-Seamless Steel Pipe, ERW Steel Pipe, LSAW Steel Pipe, SSAW Steel Pipe
Contact Us
Seamless Steel Pipe,ERW Steel Pipe,LSAW Steel Pipe,SSAW Steel Pipe,

Threeway Steel Co., Ltd

E-mail: sales@srtsteelpipe.com

Address: 22nd Floor, Royal Wing Tower, Long Champ International Building, No.9 Xiangfu Road, Changsha, Hunan, China, PC: 410116

Phone:0086-731-8873-9521  

Home - NewsNews Center
Comparison of advantages and disadvantages of spiral steel pipe and straight seam steel pipe welding

Comparison of advantages and disadvantages of spiral steel pipe and straight seam steel pipe welding

Keywords :Comparison of advantages and disadvantages of spiral steel pipe and straight seam steel pipe welding        Update : 2022-03-25        View(s) : 1259

The welding seam of the spiral steel pipe is longer than that of the straight seam steel pipe . If the pipe length is L, the welding seam length is L/cos(θ). The vast majority of steel pipe defects are concentrated in the weld and heat-affected zone. The long weld means that the probability of ...

The welding process of thick-walled steel pipe

The welding process of thick-walled steel pipe

Keywords :The welding process of thick-walled steel pipe        Update : 2022-03-24        View(s) : 906

Welding method: When welding thick-walled steel pipes , first clean the oil, paint, water, rust, etc. of the welding joints, and then open the grooves according to the wall thickness. It is the gap of the product, which is generally 1-1.5 times the diameter of the electrode or wire. If the groove...

The phenomenon of fake and inferior thick-walled steel pipes

The phenomenon of fake and inferior thick-walled steel pipes

Keywords :The phenomenon of fake and inferior thick-walled steel pipes        Update : 2022-03-23        View(s) : 855

1. Fake and inferior thick-walled steel pipes are prone to folding. 2. Fake and inferior thick-walled steel pipes often have pockmarked surfaces. 3. Fake and inferior thick-walled steel pipes are prone to scarring on the surface. 4. Fake and inferior materials are prone to cra...

What is the difference between the surface processing of spiral steel pipe and stainless steel pipe

What is the difference between the surface processing of spiral steel pipe and stainless steel pipe

Keywords :What is the difference between the surface processing of spiral steel pipe and stainless steel pipe        Update : 2022-03-22        View(s) : 1105

Let's first talk about the original surface of the stainless steel tube: NO.1 The surface that is subjected to heat treatment and pickling after hot rolling. Generally used for cold-rolled materials, industrial tanks, chemical industry equipment, etc., the thickness is thicker from 2.0MM-8.0MM. Dull...

Commonly used non-destructive testing methods for steel pipes

Commonly used non-destructive testing methods for steel pipes

Keywords :Commonly used non-destructive testing methods for steel pipes        Update : 2022-03-21        View(s) : 991

The commonly used nondestructive testing methods for steel pipes include radiographic testing (RT), ultrasonic testing (UT), magnetic particle testing (MT), and penetrant testing (PT), which are called the four major conventional steel testing methods. These four methods are the most commonly us...

Page(s):  1 ... 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 ... 474