
Threeway Steel Co., Ltd
E-mail: sales@srtsteelpipe.com
Address: 22nd Floor, Royal Wing Tower, Long Champ International Building, No.9 Xiangfu Road, Changsha, Hunan, China, PC: 410116Phone:0086-731-8873-9521

Keywords :Calculation method of length and height of steel elbow and blanking length of steel elbow Update : 2023-08-02 View(s) : 1293
The calculation method of the length and height of the steel elbow and the blanking length of the steel elbow are questions that many buyers want to ask. The experience of teaching the basic knowledge of the steel elbow has summarized the calculation method in detail. 1. 1.5 times the cente...

Keywords :3PE anti-corrosion steel pipe manufacturing process Update : 2023-07-31 View(s) : 907
The base material of 3pe anti-corrosion steel pipe includes seamless steel pipe, spiral steel pipe, and straight seam steel pipe. The three-layer polyethylene (3PE) anti-corrosion coating has been widely used in the oil pipeline industry due to its good corrosion resistance, water vapor resistan...

Keywords :The processing method of steel pipe fittings Update : 2023-07-27 View(s) : 894
There are also many processing methods for steel pipe fittings . Many also belong to the category of mechanical processing, and the most used are the stamping method, forging method, rolling method, rolling method, bulging method, stretching method, bending method, and combined processing method....

Keywords :The main characteristics of TPEP anti-corrosion steel pipe Update : 2023-07-25 View(s) : 1
The main features of TPEP anti-corrosion steel pipe are: 1. The anti-corrosion performance of polyethylene can withstand various corrosions in the natural environment; 2. High quality-price ratio; 3. Polyethylene has excellent insulation properties, and its electrical properties are basica...

Keywords :Qualified standard parameters for flaw detection of large-diameter steel pipes Update : 2023-07-21 View(s) : 950
In the production of large-diameter steel pipes , single circular inclusions and pores with a weld diameter not exceeding 3.0mm or T/3 (T is the specified wall thickness of the steel pipe) are qualified, whichever is smaller. In any 150mm or 12T length weld range (whichever is smaller), when the ...